用于藥物輸送的納米顆粒技術
“市場上有許多珠(球)研磨機可供使用，從實驗室規模到工業化生產規模的均有，產品能夠大規模生產是其進入市場的一個必要條件，除了產品成本低，珠(球)研磨法的一個優點就是能夠大規模生產?？紤]到簡便性的問題，研磨室通常設計成六角形，此時研磨室容積的76%都可以被研磨材料填充。1000L的研磨機對應760L研磨材料：氧化鋯的表觀密度是3.96kg/L，需要2.8t的研磨材料。圖2.1給出了這個問題的解決方法。圖中示出的是Dispermat SL珠(球)研磨機和外部的混懸容器?；鞈乙和ㄟ^泵反復地通過珠(球)研磨機。這種方法減少了研磨材料的重量，但延長了研磨時間?！?/p>
Nanoparticle Technology for Drug Delivery
“There are a number of pearl mills available on the market, ranging from laboratory-scale to industrial-scale volumes. The ability for large-scale production is an essential prerequisite for the introduction of a product to the market.One advantage of the pearl mills, apart from being low-cost products, is their ability for scaling up. Assuming, for reasons of simplicity, hexagonal packaging of the milling pearls, 76% of the milling chamber volume will be filled by the pearls. In case of a 1000L mill this corresponds to 760L milling material; based on the apparent density of zircon oxide pearls being 3.69 kg/L, this corresponds to 2.8 tons of milling material.Figure 1 shows the solution for this problem, a pearl mill with an external suspension container. The suspension is continuously pumped through the pearl mill. This approach reduces the weight of the pearl mill itself, but it prolongs the milling times.”
